12 Inch Miter Saw

8 Best 12 Inch Miter Saw 2022

Imagine: you wanna cap the cabinets of your house, for which you wanna cut some crown molding. So, you go to the shop and buy an ordinary miter saw. But after returning home, you realize you’re unable to make deep cuts on thick, wide boards.

How disappointing, right? So that this never happens to you, we recommend you get yourself a 12 inch miter saw. How will it benefit you? A miter saw is a woodworker’s best friend. This single power tool can do it all, from making furniture to wooden cabinets.

A 12″ miter saw is the largest size used by most woodworkers and DIYers for basically three main things. Firstly, for regular cross-cuts, for angled cuts and for bevel and compound angle cuts. There’s so much more a 12″ miter saw can build, even if you’re just a beginner. Keep scrolling as we will reveal how you can choose the best 12-inch miter saw for yourself and what you can do with it.

Which is Better: 10 or 12 inch Miter Saw?

Before we answer this question, you need to answer our question first! Do you have to work with heavier lumber boards and bigger crown molding planks?

Then without the shadow of a doubt, a 12-inch miter saw is what you need to help save your time and sweat and ensure the best accuracy.

Now you may say, “But 10-inch miter saws are easily portable and less expensive with higher blade speed!” Well, that’s true. Both 10-inch and 12-inch miter saws have their perks and drawbacks. It’s very easy to get confused when to use each one.

When to Use 10″ Miter Saw?

If you want to choose a miter saw for basic carpentry applications, such as – straight cross-cuts, trim works, and general angled cuts for molding, any 10-inch miter saw should work just fine.

This is because a 10-inch blade will rotate faster than a 12-inch one, bringing about smoother cuts and a finer finish. It’s possible because of the powerful motor, which gives the 10-inch blade a higher RPM rate.

What Can You Do with a 12″ Miter Saw?

Okay, there’s literally nothing a 10″ miter saw can do that a 12″ miter saw can’t. In fact, you can also use a 10″ blade in the 12″ miter saws. From 7″ to 9″, all blade sizes can easily fit inside a 12″ miter saw. How amazing!

All 12-inch miter saws work like magic when cutting through thick wooden boards. Even if the boards are heavy and rough, like plywood or laminated wood, it takes seconds to cut through a wood stud measuring 4×6 with a 12-inch miter saw in one try.

Before You Make a Decision

Are you all hyped up now to get yourself a 12-inch miter saw right away? Well, without proper background knowledge, you are likely to get stuck in a dilemma as there are several types of 12-inch miter saws manufactured by various brands.

To help you decide faster, we suggest you go through our favorite picks of the best 12 inch miter saws available near the reach of your hand. Let’s begin!

Quick Overview

Before deciding on which 12″ miter saw to buy, you’ll first need to understand what you can expect from each. Thus, here’s a brief overview of our thoughts and insights on spotting out the best 12 inch miter saw for your convenience –

  1. Best Overall Pick: DEWALT (DWS780) 12″ Sliding Compound Miter Saw
  2. Best 12-inch Dual Bevel Sliding Miter Saw: BOSCH (GCM12SD)
  3. Best 12-inch Single Bevel Compound Miter Saw: DEWALT (DWS715)
  4. Best 12-inch Dual Bevel Sliding Miter Saw With Laser: Makita (LS1219L)
  5. Best Compact 12-Inch Miter Saw With Large Fences: METABO HPT (C12RSH2S)
  6. Best 12-Inch Cordless Miter Saw for Beginners: SKILSAW SPT88-01
  7. Best Value For Money: SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser
  8. Best 12″ Corded Dual Bevel Miter Saw For Woodwork: Milwaukee 6955-20

Detailed Reviews of Our Top Recommended Best 12″ Miter Saws

Here you go with the long-awaited in-depth reviews of the best of the bests 12-inch miter saws. These work like magic and are suitable for general and advanced woodworking projects, no matter whether you are a pro or just a beginner.

  1. DEWALT-DWS780 12-inch Sliding Compound Miter Saw

DEWALT-DWS780 12-inch Sliding Compound Miter Saw

Features

  • Weight‎: 56 pounds
  • Dimensions: ‎24 x 9 x 48 inches
  • Colour: ‎Black
  • Material: Metal
  • Power Source: ‎Corded Electric
  • Voltage: ‎120 Volts
  • Wattage: ‎1675
  • Sound Level: 3 dB
  • Blade Length: 12 Inches
  • Speed: ‎3800 RPM

What’s Included?

  • ‎One 12-inch double bevel sliding compound miter saw
  • One carbide blade
  • one blade wrench
  • One dust bag
  • One vertical material clamp.

Design And Comfort

The 12″ Dewalt DWS780 sliding compound miter saw looks splendid at first glance in its majestic blue color. It has plenty of force power fueled by a 15-amp, 3,800 RPM motor to pierce through wood planks effortlessly.

It features an in-built XPS Cross Cut Positioning System that makes lowering or adjusting the blade easier. The miter saw employs a bright digital LED light over the circular blade, unique since most other common 12″ miter saws include laser light.

Cutting Capacity and Precision

Another great feature is the back fence. It helps you increase the depth of any normal cut from any angle. For example, you can even cross-cut on a 2×12 board through 45 degrees with ease and tilt in both directions (left and right).

And Oh! Did we not tell you about the versatile sliding arm? It helps to ensure maximum cutting width and accurate cut results better than non-sliding compound miter saws.

Easy Clean-Up

The Dewalt miter saw also includes a dust bag in the dust vent located at the back of your miter saw that protects the blade from dirt particles. Thus, you don’t have to spend extra time cleaning up any mess.

What We Liked?

  • Detent plate is stainless and adjustable.
  • Lightweight, which facilitates easy portability.
  • A Cam lock miter handle for accurate angles.
  • Long sliding fences for support
  • Dust Bag to capture dust particles
  • XPS technology with an LED light system for better visibility

What You May Not Like?

  • Doesn’t include a cutting guide
  • The dust bag can only collect up to 75% dirt particles.

 

  1. BOSCH (GCM12SD) 12-inch Dual Bevel Sliding Miter Saw

BOSCH (GCM12SD)

Features:

  • Item Weight: 3.2 ounces
  • Material: Stainless Steel
  • Power Source: ‎Corded Electric
  • Voltage: ‎120 Volts
  • Handle Material: Wood, laminates
  • Cutting Diameter: 12 Inch

What’s Included?

  • One 12 Inch Dual-Bevel Glide Miter Saw
  • One Premium 12 Inch 60-Tooth Carbide Blade
  • One Wrench
  • One Vertical Work Clamp
  • One Dust Bag
  • One Vacuum Adapter

Accuracy and Smoothness

Do you want to build custom picture frames or a wooden planter? In that case, it’s so important to ensure smooth cuts around the corners. That’s what the Axial-Glide feature of this best dual bevel sliding miter saw will help you achieve.

Cutting Style and Depth

Other than top-notch accuracy and maximum cut capacity, the 12″ BOSCH GCM12SD miter saw can make any cut of any depth on all types of wood surfaces. Its horizontal capacity can go up to 14 inches, and the highest it can go vertically is about 6.5 inches.

Quick Adjustments and Alignments

Now, moving on to its most unique feature, can you guess what it is? It’s the square lock fences notable for its quick-release property. With a single touch of your finger, you can make alignments precisely without much hassle.

The Bosch GCM12SD 12″ sliding miter saw includes an in-built 15 amp motor that delivers a powerful high speed of around 3,800 rpm.

It allows the miter blade to spin fast. And as for the cherry on top, you can make bevel adjustments without having to reach the very back of your saw. Thus, saving time and energy.

What We Liked?

  • Axial-Glide feature for long-lasting precision.
  • Square-lock fences that come pre-aligned.
  • Large cutting capacity for all types of woodwork.
  • Bevel scales are easy to read
  • Dust chute to keep it clean
  • Vacuum adapter to maximize convenience.

What You May Not Like

  • Inept thumb-operated trigger safety
  • No crown bevel detent is available

 

  1. DEWALT (DWS715) 12-inch Single Bevel Compound Miter Saw

DEWALT (DWS715)

Features:

  • Item Weight: ‎42.8 pounds
  • Product Dimensions: 26.77 x 21.85 x 18.9 inches
  • Size: 5/8″ or 1″
  • Blade Length: 12 Inches
  • Speed: 4000 RPM
  • Power Source: Corded Electric
  • Blade Length: ‎12 Inches

What’s Included?

  • DWS715 Single Bevel Compound Miter Saw
  • 12″ Carbide Tipped Blade
  • A Wrench
  • Dust Bag
  • Vertical Clamp

Precise Cutting and Stability

Ever seen how a warm knife smoothly cuts through butter? That’s exactly how smooth working with this best 12″ compound miter saw will feel like.

Whether you are cutting through plywood or firewood, it will always bring about the smoothest and finest cuts.

And keep calm while we tell you how accurate and precise each cut is. A non-sliding miter saw ensures much better stability than most other saws with a sliding arm.

Size, Weight, and Material

Have you always wanted a miter saw durable and sturdy enough to last long for years after years? Then this might be the best work buddy you need.

Because firstly, the material is high-quality stainless steel, and secondly, it features a cam miter lock for simple anytime adjustments.

Moreover, if your profession is carpentry and you have to travel a lot, then the Dewalt (DWS715) 12″ miter saw can be your life savior. Since it’s lightweight, portable, and can be easily carried around.

You must be wondering whether the fences are strong enough for support or not. Well, the big sliding fences can support your wooden board up to 5.5 inches vertically – be that be for base molding or crown molding.

What We Liked?

  • Precise miter system for high accuracy.
  • Auto dust collecting feature for easy cleanup
  • Highest speed power (4000rpm)
  • Sharp 12″ Blade that gives accurate cuts
  • Powerful 15 AMP motor
  • Digital build quality makes it sturdy and durable.

What You May Not Like

  • Batteries not included
  • A bit cumbersome
  1. Makita (LS1219L) 12-inch Dual Bevel Sliding Miter Saw With Laser

Makita (LS1219L) 12-inch Dual Bevel Sliding Miter Saw With Laser

Features:

  • Item Dimensions: 23.1 x 36 x 81.6 inches
  • Power Source: Corded
  • Number of Teeth: 60
  • Item Weight: 81.6 pounds
  • Voltage: 120 volts
  • Blade length: 12 inches
  • Motor speed: 3,200 RPM
  • Base material: Aluminum

What’s Included?

  • 12″ Single Bevel Compound Miter Saw
  • 60T Carbide Tipped Blade
  • A Wrench
  • Dust collecting bag
  • Vertical Clamp

High Visibility and Power

Do you suffer from poor vision and often have difficulties spotting the cut line? Then this best 12-inch dual bevel sliding miter saw might be just the thing you need. It has a digital laser system that ensures greater visibility even if the blade is not turning.

The drive motor is very powerful, with 15.0 AMP to fuel a 12″ fast-spinning blade. It delivers 3,200 RPM and doesn’t really require that high maintenance. The base is large and built of aluminum, a very sturdy metal. Thus, increasing the stability of material for effective cutting.

Cutting Capacity and Accuracy

Furthermore, at an angle of 90 degrees, you can make 15″ cross-cuts while woodworking. Also, the saw miters from 0° up to 60 degrees either left and right, and can make positive steps in the left or right direction at 0°, 15°, 22.5°, 31.6°, 45° and 60°.

Let’s take a look at the drive gearbox. It’s like a guard system manufactured for higher optimum when it comes to vertical cutting. The highest cutting capacity for wooden baseboards is 6-¾ inches and for crown molding, 8 inches nested.

What We Liked?

  • A direct-drive gearbox for convenience.
  • Quick adjustments available up to 48° to diversify cutting options
  • 15 amp drive power with high speed
  • Dual ports for collecting dust
  • Dual steel rail sliding system for external support
  • Maximum cutting capacity ensures higher precision.
  • Sturdy material increases longevity.

What You May Not Like

  • Occasional fence defects
  • Poor dust collection

 

  1. METABO HPT (C12RSH2S) 12″ Sliding Compound Miter Saw

METABO HPT (C12RSH2S) 12" Sliding Compound Miter Saw

Features

  • Item Weight: ‎77.8 pounds
  • Product Dimensions: ‎36.6 x 24 x 23.4 inches
  • Power Source: Corded Electric
  • Voltage: ‎120 Volts
  • Blade Length: ‎12 Inches
  • Speed ‎: 4000 RPM
  • Miter range: 52° left and right
  • Bevel range: 0-48° left and right

What’s Included?

  • ‎12-inch miter saw
  • 60T TCT Saw Blade
  • Dust Bag
  • Vice Assembly
  • 17mm Box Wrench

Visibility and Sliding Ability

Wondering why we have enlisted this in our list of best 12″ inch miter saws? Well, it’s because this new Metabo HPT 12″ compact miter saw features a unique guidance system for shadow cut lines. The lighting feature helps to increase visibility.

The Metabo HPT 12″ miter saw blade has a brilliant sliding ability which gives this saw really smooth cross-cutting capabilities. At a 90-degrees angle, the blade cuts a wooden board 12-1/4″ in width. And at a 45-degree angle miter cut, it can go up to 8-5/8″ wide.

Cutting Style and Alignments

Whoa! Did we tell you about its large fences yet? The fence is about 5-1/2″ tall, allowing you to cut pretty thick size baseboards vertically on the fence. And if you want to do crown molding, the Metabo HPT 12″ miter saw can cut nested crowns that are 7-1/2″ tall.

Furthermore, you can tilt in both directions up to 45° because of the dual bevel feature. Therefore, when you’re cutting different ends of a board, you won’t really need to flip the boards over and over again or at all.

What We Liked?

  • Advanced miter lock for security
  • Powerful 15 Amp motor
  • Vertical handle for easy transport
  • Compact digital slider system
  • Laser for clear visibility
  • Large sliding fences for support
  • Average dust coverage

What You May Not Like

  • The brake doesn’t stop instantly.
  • Safety button on the left side of the handle is difficult for a left-handed person.
  1. SKILSAW (SPT88-01) 12-Inch Cordless Miter Saw

SKILSAW (SPT88-01) 12-Inch Cordless Miter Saw

Features

  • Blade Length: 12 Inches
  • Item Dimensions: 31.25 x 19 x 20 inches
  • Item Weight: ‎51 pounds
  • Power Source: AC
  • Voltage: ‎120 Volts
  • Speed ‎: 4000 RPM

What’s Included?

  • ‎12 Inch. SKILSAW Worm Drive Dual-Bevel Sliding Miter Saw
  • SKILSAW 60 tooth carbide blade
  • Dust Bag
  • 2 Crown Stops
  • Dust Elbow
  • Vice Clamp
  • 2 Size Allen Wrench
  • Miter Lock Knob

Ease of Use and Comfort

Hey buddy. Are you looking for a 12″ miter saw that is lightweight pretty reasonably priced with advanced technology? Then the SKILSAW SPT88-01 12-inch miter saw is indeed what you have been looking for.

This best 12-inch dual bevel sliding compound miter saw is considered one of the lightest saws available in the market. It’s simple, efficient, and easy to carry around. Plus, tidying up won’t be hectic as the dust collector bag is there to do the job.

High Power and Durability

Don’t just look at the 15-amp dual field motor only because that’s very basic. Literally, every best 12″ miter saw has it. However, to expand the longevity and durability of the miter saw, it also features a motor cooler to prevent overheating.

Another top-notch feature is the shadow cut-line indicator. Yeah, we are talking about the LED guidance system, which is cool if you work after the evening. It also helps to make sure each cut is as precise as possible.

What We Liked?

  • Dual bevel with high cutting capacity
  • Dual Field Motor 15 AMP that ensures high speed
  • Digital LED light system to see cut lines more clearly.
  • Classy design and build making it innovative.
  • Lightweight that aids portability.
  • Easy adjustments and preset options for convenience

What You May Not Like?

  • Does not include brackets
  • Doesn’t come with a stand
  1. SKIL (3821-01) 12-Inch Compound Miter Saw with Laser

SKIL (3821-01) 12-Inch Compound Miter Saw with Laser

Features

  • Blade Length: 12 Inches
  • Item Weight: 42.5 pounds
  • Item Dimensions: 28.28 x 18.15 x 20.5 inches
  • Motor power: 15 AMP
  • Speed: 4500 RPM
  • Power Source: Corded Electric
  • Voltage: ‎120 Volts

What’s Included?

  • IKEA style hex wrench
  • ‎12-inch compound miter saw
  • 60T Saw Blade
  • DustBag

Clamping System and High Speed

Does your wood piece keep moving around when trying to cut? There is nothing to worry about with this best 12″ single bevel compound miter saw in hand. It features a horizontal clamping system that helps to hold the board firmly against the fence during the cut.

A great thing about its standard cutting style is that it can effectively cut through all types of wood. Thanks to the 4500 rpm high speed provided by the 15 amp power motor.

Maximum Cutting Capacity

Overall, the miter saw can do about any job, but the cross-cutting capacity is pretty average. Also, you will have to flip the board to make compound cuts because this miter saw lacks a dual bevel feature.

But, if you want to do basic renovations and DIY projects, the problems mentioned above shouldn’t really be an issue.

The 12″ miter saw has the ability to smoothly cut through a 8″ wide board at 90° in a single cut. And at 45°, the 12″ blade can cut a dimensional 6″ board.

What We Liked?

  • Sturdy extension rails left/right
  • Bright Laser light for more accurate cuts
  • Powerful 15 AMP motor with 4500 RPM speed.
  • Quick-mount system for easy usage
  • Dust bag for easy cleanups
  • Tough, durable material making it long-lasting.

What You May Not Like

  • Heavyweight
  • The Carbide blade is a little rough
  1. Milwaukee (6955-20) 12″ Corded Dual Bevel Miter Saw

Milwaukee (6955-20) 12″ Corded Dual Bevel Miter Saw

Features

  • Material: Alloy Steel
  • Item Weight: 77.8 pounds
  • Product Dimensions: ‎30.9 x 22.8 x 21.9 inches
  • Blade Length: ‎12 Inches
  • Speed: ‎3250 RPM
  • Measurement System: Metric

What’s Included?

  • Power Miter Saw
  • Construction – Power Saws
  • Miter Saws

Easy Cleanups 

Milwaukee really did an impressive job with the advanced exhaust system; it deserves our applause. It effectively collects the leftover dirt particles instead of collecting inside the chute, which creates an extra hassle for the owner for cleanup.

High Visibility of Cutting Line

Most 12″ miter saws have a laser system, but this saw has dual lights for better visibility of the cut line.

The display light is not so dim but not too bright either, which is perfect for setting the angles to the tenth of a degree. Also, even if you don’t use the dust bag, the vacuum adapter will do the job on its own.

Advanced Technology and Durability 

The 6955-20 12-inch miter saw features what Milwaukee likes to call ‘Constant Power Technology.’ It’s a unique property that ensures the blade spins fast at a solid 3250 rpm even without load. The detents for mitering are very sturdy, and it can tilt up to 60° in both directions.

Plus, there’s no doubt about the durability of the material. It’s built of steel alloy. You can also conveniently switch the depth of different cuts from back to front because of the dado stop.

What We Liked?

  • Dual integral lights for high visibility
  • Dual-Bevel Miter for quick adjustments.
  • 15 amp motor with high speed
  • Integral dust channel to collect dust
  • Accurate and precise cuts

What You May Not Like

  • Not easily portable
  • No batteries included

How Deep Can a 12-inch Miter Saw Cut?

The circular blades of all 12-inch miter saws are sharp enough to cut as deep as a minimum of 3.5 inches in a single strike and a maximum of 4 inches deep.

Yes, you read that right! Even if the material of the wood is hard, like plywood. Any average 12-inch miter saw can cut about 7.5 inches long and wide enough for 2×8s.

Can a 12-inch Miter Saw Cut a 4×6 Wood?

Of course! It may not give finer results with a 10-inch miter saw, but it’s no big deal for a 12″ miter saw to cut through a piece of wood measuring 4×6.

Remember this key info: the larger and sharper the blade, the deeper and wider it will be cut. Basically, a 12-inch miter saw can cut through a 2×8 timber board at 90° and can cut a 2×6 wood stud at a 45° angle.

To be honest, it all depends on the sharpness of the blade. If you are using an old second-hand 12″ miter saw that has become rusty or like, covered with dirt particles, it may take you up to two to three tries to cut a 4×6 wooden board with the dull and blunt blade.

Therefore, you must keep the blade nice and clean to preserve its sharpness and precision as the blade can become rusty when in regular contact with water or frost, too, on cold, freezing days.

FAQs 

  1. Can a 12-inch Miter Saw Cut Through Metal?

We don’t recommend it, though. A 12″ blade is only suitable for wood cutting. But yes, you can buy a metal blade and insert it after detaching the carbide blade of the saw. Then you’ll be able to cut all types of metal, such as aluminum.

  1. Can a 12-inch Miter Saw Cut a 6×6?

The 12″ miter saws won’t be able to cut a 6×6 wooden board as smoothly as they may cut a 2×6 board. It’s still possible, though, using multiple cuts, just not in one go.

  1. How Many Teeth Should My 12-inch Miter Saw Blade Have?

All 12″ miter saws have 60-tooth carbide blades. However, if you want to cut through a wooden board of extreme thickness, you can separately buy a 100-tooth blade and insert it.

  1. Can I Put a 7″ Blade on a 12″ Miter Saw?

Ans: Yes. Why not? You can also put a 10″ blade on a miter saw or blades with an even smaller diameter.

Final Words

All in all, to get the best 12 inch miter saw, make sure to check several factors such as –

  • The cutting capacity
  • Bevel adjustment options
  • LED lights
  • And whether it has a dust channel or not.

If you are beginner-level and want to use a 12″ miter saw for everyday basic woodwork projects, you can go with any miter saw with rpm power between 3000-4000.

If you’re a professional woodcutter or wanna be one, we definitely recommend a 12″ miter saw with more than 4000 rpm speed.

Leave a Reply

Your email address will not be published. Required fields are marked *